Quick Cast:
 Area Reports
 Find-a-Guide
 Forums
 Tides

Departments:
 Articles
 Books
 Clubs & Orgs.
 Fishing Reports
 Feedback
 Forums
 Fly Fishing
 Guides & Charters
 Links
 Photo Gallery
 Reef Locator
 Regulations
 Software
 Survey
 Tournaments
 Travel
 Weather
 Home

Administration:
 About Us
 Advertising
 Contact
 Privacy
 Terms of Use
 Web Development

31' SeaVee Construction Pics

All Matters Dealing with Boats

Moderator: admin

31' SeaVee Construction Pics

Postby RudyGomez » Tue Jun 15, 2004 5:48 pm

This week SeaVee began work on my 31'. I'm so excited I'd like to share the construction pics. I can't emphasize enough how great it is working with Ariel and the folks at SeaVee. They have been FANTASTIC in every respect.

June 11:

Here's the hull – notice the sides being vacuum bagged.
Image

Inner Liner
Image

Inner Liner
Image

June 12:

Hull after form core added - port side core already glassed.
Image

Close-up of bow section
Image

Foam core being added to inner liner
Image

June 15:

Went down to SeaVee today with a box of much appreciated pastelitos... The stringers are in. Below are a few different shots.

Stringers
Image

Stringers
Image

Stringers & Transom Area
Image
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Postby RudyGomez » Wed Jun 16, 2004 8:01 pm

June 16:

Both 150 gallon fuel tanks installed and foamed in.
Image

Fuel tanks plumbed, foam trimmed and electrical raceways added
Image

Inner liner elevated and prepared for union with hull
Image

The inner liner is moved into position
Image
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Postby RudyGomez » Sat Jun 19, 2004 8:24 pm

She's out of the mold...

June 17:

This sight greeted me as I walked into the shop
Image

Here's another shot of the hull
Image

The deck
Image

Forward
Image

Aft
Image
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Postby RudyGomez » Tue Jun 22, 2004 3:35 pm

June 22:

The bilge area has been sanded and prepped for gelcoat. Although it’s not very noticeable on the photo, they have also trimmed away the excess fiberglass along the edge where the hull and inner liner are joined.

Image
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Postby RudyGomez » Wed Jun 23, 2004 4:46 pm

June 23:

The boat was cleaned and moved into the rigging facility:

Image

Image

Rick (Magic Hook), here's a pic of your boat... Getting close...

Image
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Postby RudyGomez » Fri Jun 25, 2004 5:10 pm

June 25:

What a difference 2 days make.

Plumbing and rigging is in full swing
Image

Three transducers glassed into the keel
Image

View of transducers flush with keel
Image

Fresh and saltwater washdown pumps.
Image

Magic Hook, they've mounted your engines!
Image
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Postby RudyGomez » Sat Jun 26, 2004 3:16 pm

June 26:

Took my son Rudy this morning to see the boat.

Bilge
Image

Bilge
Image

Macerator pump for head
Image
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Postby RudyGomez » Wed Jun 30, 2004 10:41 am

June 29:

Made a bracket out of Starboard to hold the O2 tank

Image
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Postby RudyGomez » Wed Jun 30, 2004 4:29 pm

June 30:

Went down to SeaVee today and they've nearly completed all below deck plumbing and rigging. They're basically waiting for the cap which won't be out of the glass shop until later this week, or next. They'll also begin rigging the console next week...

Forward view of bilge plumbing.
Image

Stern view of bilge.
Image

Forward bait well and head plumbed.
Image

Magic Hook, they were putting your boat on the trailer when I pulled up. Here are some photos...

Image

Image

Image
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Oxygen System

Postby Magic Hook » Thu Jul 01, 2004 8:48 am

Rudy,

Tell me about the oxygen system? Looks cool, do you have experience with one? I have seen the BMC advertised. How do you refill the tank?

Thanks much for all the pictures, MUCH appreciated. Looks like I can take her home next Wed.

Rick
Capt. Rick
Magic Hook
Featured Guide
Featured Guide
 
Posts: 67
Joined: Tue Mar 11, 2003 8:52 am
Location: Southwest Florida

Postby RudyGomez » Thu Jul 01, 2004 10:23 am

Rick,

This will be my first time with an O2 system. I have no firsthand experience, but have heard from a few captains that it does supercharge the bait. We'll see. It's mainly intended for tournament time, but depending on how effective it is, I may use it daily. If so, I may get an extra cylinder...

SeaVee is installing the bracket shown above, but that's it. They didn't want any liability exposure arising from installing a high pressure gas tank/system.

I've been told that you can take the tank to any welding shop and they will refill it for a nominal fee. I haven't filled it yet so I don't know, but I think it's something like $5.

Wow, one week till delivery! That's great. I must say, she is the nicest 29' I've ever seen.
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Oxygen

Postby Magic Hook » Fri Jul 02, 2004 8:11 am

Rudy,

The reality was a delima. We loved the 31 like yours. Problem was when the dust setteled I trailer 60 mi 4-6 days a week year round right now and launch single handed. I felt the 31 was just to much for that, not to mention the additional 25k pushed my budget. My wife picked out the top and tackle center as must have's. At the time they had not yet done one, so I had concerns It would all look odd, but after seeing your pictures, I am happy.

That O2 system looks good. For me I was thinking of one for the reason of keeping some bait overnight in the well on the trailer. Crabs are 2$ apiece and hate to toss them every day! I believe its safe done right, but would want a oxygen cylinder at my house for the refill I think.
Capt. Rick
Magic Hook
Featured Guide
Featured Guide
 
Posts: 67
Joined: Tue Mar 11, 2003 8:52 am
Location: Southwest Florida

Postby RudyGomez » Wed Jul 07, 2004 9:32 pm

July 7:

It's been one week since my last visit to SeaVee. There isn't much noticeable difference in boat, but I thought I'd snap a photo anyway. After the long holiday weekend, they have finished all below deck rigging and were in the process of polishing the boat from bow to stern. The console had just come out of the fiberglass shop and was being prepped for rigging. The cap was due out of the glass shop tomorrow and could possibly be installed by Saturday...

Image
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Postby RudyGomez » Wed Jul 07, 2004 9:36 pm

Magic Hook,

As I pulled up to SeaVee today, I saw you pulling away with your new boat. That thing was pimped out. I love your izing glass enclosure with the red trim - sweet!
Rudy Gomez
CyberAngler Webmaster
User avatar
RudyGomez
How about cuttin’ some bait?
How about cuttin’ some bait?
 
Posts: 1432
Joined: Sun Feb 23, 2003 10:08 pm
Location: North Miami Beach, FL

Darn!

Postby Magic Hook » Thu Jul 08, 2004 9:24 pm

Rudy,

I was there almost all day, I figured I might see you at some point. You are right they were waxing and tweaking for hours but she really looked good. I wish I had seen you for sure. I had her out today to play, and all went well. Its faster than I am used to, 42 mph, at 4000 rpm.
Capt. Rick
Magic Hook
Featured Guide
Featured Guide
 
Posts: 67
Joined: Tue Mar 11, 2003 8:52 am
Location: Southwest Florida

Next

Return to Boating

Who is online

Users browsing this forum: No registered users and 5 guests

Copyright © 1997-2024, CyberAngler - All Rights Reserved
Privacy Policy :: Terms of Use
For Questions and comments please use our Feedback Form

Back to the Top
cron