Quick Cast:
 Area Reports
 Find-a-Guide
 Forums
 Tides

Departments:
 Articles
 Books
 Clubs & Orgs.
 Fishing Reports
 Feedback
 Forums
 Fly Fishing
 Guides & Charters
 Links
 Photo Gallery
 Reef Locator
 Regulations
 Software
 Survey
 Tournaments
 Travel
 Weather
 Home

Administration:
 About Us
 Advertising
 Contact
 Privacy
 Terms of Use
 Web Development

Power Pro Line Casting Tips for Tangle Free Casting

Capt. Mike Locklear
November 4, 2008
Homosassa - Saltwater Fishing Report

After I make a cast, I ALWAYS close my bail by hand just before the rig lands in the water. This does two things. It keeps the running line from tangling around the top of the cork and the line should become tight both on the spool and to your rig. Also, I make sure there are no loops on the spool of the reel before and after I cast. If there is a loop buried under the spool of line, never cast it, instead pull the line by hand preferably upwind from your drift [and not under the boat and around the motor] until the loop is out.

In order to stay tangle free, I only fill my reels three quarters to the rim of the spool. The last tip when deploying braids is NO side arm cast. This action will result in birds nest the fastest. Last but not least is to not cast the rod as hard as you possibly can. An 85-90% power cast is just as effective if properly launched over the shoulder with the tip of the rod on the same plain through the cast.

Try following these tips for tangle free days and keep your tip up!

Homosassa Fishing Forecast:

Spotted seatrout will be plentiful for the rest of the year. Remember that trout season remains open in the northwest section until February 1. The South section is closed for harvest in November and December. "Northwest Region" means all state waters north and west of a line running due west from the westernmost point of Fred Howard Park Causeway (28°9.35'N., 82°48.398'W.), which is approximately 1.17 miles south of the Pasco-Pinellas County Line, to the Florida-Alabama border, and adjacent federal Exclusive Economic Zone (EEZ) waters.

My new found lure added to my arsenal is the high roller top water inshore lure kit. See http://www.highroller.com/ This lure line has been around for more than a decade and are made for the top water caster. You must by one of the kits for top water action. They float high in the water and all are unique becasue they are made from wood. You will hear more about these in my next report.

Dozens of one-quarter ounce 3-inch DOA glow shrimp, Bass Assassin Slurp and Berkley Power Baits adorn my tackle bag. A red 3-inch cigar shaped Cajun Thunder cork rig in tied with a two foot long section of 20-pound test completes the rig. A good tip is to use a 3/32 ounce jig head made by Love Lure.

For trout, I will drift and cast downwind using 10-pound test Power Pro braided line. I fish with a 3000 Shimano Spheros spinning reel and a 7 ½ foot Shimano Teramar rod powered by medium action with an extra fast tip.

Instead of just popping the cork, I let it stand on end after a two foot long sweep of dragging the cork over the surface creating a bubble trail. Remember trout usually grab the jig on the way down. When the cork goes under, I quickly reel up any slack to set the hook and keep on reeling until the trout is at boatside where a dip net is employed to land the fish.

Use this method and you will catch a nice mess of fish. Locations are the mouths of Fish Creek, St. Martins River and the Homosassa River. Find spotty bottom mixed with grass and there you will find the fish in about three feet of water.

Target Species:

Trout - Redfish - Grouper

More Fishing Reports:

 

Referrals-Avid Angler-Social Media, Blogger, FaceBook and Fishing Reports Writer.

Contact Info:


Phone: 352-422-1927
Email the Captain
Browse Photo Gallery
Display Find-a-Guide Listing


Copyright © 1997-2024, CyberAngler - All Rights Reserved
Privacy Policy :: Terms of Use
For Questions and comments please use our Feedback Form
Back to the Top